Verint Nextiva S4200-2V-BZ, Руководство пользователя

Страница: 50 / 152

3: Configuring and Installing the Device
44 Verint Video Intelligence Solutions
You should now have video on the analog monitor connected to the receiver. Audio, I/O,
and serial port data can also be transferred.
Installing the Wireless System
After successfully configuring your wireless system, you are ready to install it. To optimize
your system radio performance, carefully review the site planning information presented in
Chapter 2 on page 12. For more information about the installation procedure of your
outdoor wireless access point, refer to the Nextiva S4300 Installation Guide.
Installing a system includes:
„
Installing the transmitter
„
If required, installing an external high-gain antenna
„
If required, connecting the RS-422/485 serial port
Installing the Transmitter
You can install an S4200 on a wall or pole using a mounting assembly set that is included in
your shipment. The mounting assembly set includes:
„
A mounting bracket
„
A pole/wall pivot mount
„
A pole clamp
„
Two stainless steel straps
The following fasteners are also part of the set:
Note: You must install the mounting assembly on the S4200. It is required to properly
mount and securely ground the wireless device.
Item Description Scale Drawing
1 Lock washers for the pole clamp (2) and the
pole/wall mount pivot (2)
2 Lock washers for the mounting bracket (4)
3 Nuts for the pole clamp (2) and the
pole/wall mount pivot (2)