Verint Nextiva S1100, Руководство пользователя

Страница: 76 / 107

E: RF Contact between Masters
64 Verint Video Intelligence Solutions
Apply the following procedure to ensure that MasterA sees MasterB. You will have to access
the command line interface (CLI) of at least one master. For more information about the
CLI, refer to Chapter 4 in the Nextiva S3100 Series User Guide or to Chapter 4 in the
Nextiva S1100 User Guide.
To ensure that two master devices see each other:
1. Take down the device name of MasterB.
This name is displayed in the SConfigurator Units tab, in the Unit Information pane of
the Configuration Assistant, or in the Advanced > VSIP menu of the CLI.
2. Shut down MasterB, then power it up.
3. Wait until MasterB has selected a frequency channel. To ensure that a channel is
selected:
†
If MasterB is an S3100, go in the Advanced > Communication Status and
Statistics >Wireless Status menu of the CLI. Wait until the value of Current SCF
Connection Status is Connected to X Clients and Y Slaves.
†
If MasterB is an S1100, go in the Wireless Status window of the Configuration
Assistant. Wait until the connection status is Not Connected or Connected; these
statuses occur after Radar Detection.
†
If you do not have access to the connection status of MasterB, wait for the following
time period: (starting order of MasterB - 1) multiplied by 80 seconds.
4. Perform a site survey in MasterA:
a. Open the CLI of the device.
a. Go in the Advanced > Communication Status and Statistics > Wireless
Status menu.
b. Execute the Initiate One-Time Site Survey command.