Verint Nextiva S1100, Руководство пользователя

Страница: 102 / 107

Compliance
90 Verint Video Intelligence Solutions
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the effective isotropic radiated power (EIRP) is not more than that
required for successful communication.
Note: The S1100 devices require professional installation. They should be installed in a
location that would prevent the general population from approaching from 3 feet
(1 meter) of the radiating element.
USA
The FCC IDs are VKHCM9S1100 and NKRDCMA82 (for the S1100-49 only).
This device complies with parts 15 and 90 (for the S1100-49 only) of the FCC (Federal
Communications Commission) rules (see
http://www.fcc.gov/ ).
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for Class B Digital
Device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in residential installation. This
equipment generates and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
„
Reorient or relocate the receiving antenna
„
Increase the separation between the equipment and the S1100 device
„
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
„
Consult the dealer or an experienced radio/TV technician for help
Any changes or modifications not expressly approved by Verint Systems Inc. could void the
user’s authority to operate the equipment.
Canada
The IC ID is 7286A-CM9S1100.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication.