22
COMMISIONING
LIGHTING THE APPLIANCE
Full details on how to operate the appliance can be found on Page 12
CHECK FOR SPILLAGE
1
Before briefing the customer on how to use the appliance, a spillage test
must be
carried out
with the decorative fret in position and the fan running. The following
procedure must be followed.
2
Close all doors and windows in the room or space containing the appliance.
3
Light the appliance and burn at maximum for 5 minutes.
4
Light a smoke match and pass completely along the top front edge of the opening
(25mm down and 25mm inside). A visual check should ascertain that all the smoke
generated is drawn back into the flue.
BRIEFING THE USER
1
Demonstrate the full operation of the appliance to the user, referring them specifically to
the lay of the coals and removal of soot, as described in the user instructions.
2
Inform the user that all cleaning procedures should be carried out
ONLY
when the
appliance is cold.
3
Leave these instructions, and the user's instructions, with the user.
4
Advise the importance of having the appliance serviced and the fan unit checked for
clearance of combustion products on an annual basis.
