Verine 91154AA, Инструкция по установке и эксплуатации

Страница: 22 / 28

22
3.4.11 Night well being mode (T3)
Use this button to select Night well being mode, which
includes the following functions:
-
Gradual increase of the temperature set for cooling.
- Gradual reduction of the temperature set for heating
(Selected models).
- Reduction of noise level.
- Lower energy consumption at night.
To select night well being mode press button T3 after
selecting the operating mode using button T4 and setting
the temperature using button T7.
Ideally, you should start night well being mode operation
just before going to bed.
In cooling mode the set temperature is held for one hour
after starting night well being mode operation.
For the next hour, the setting is allowed to increase
gradually by 2
O
C over the original setting, while the fan
speed setting is low.
After the second hour, the temperature and fan speed
settings are not changed.
In heating mode, the set temperature is held for one hour
after starting night well being mode operation.
For the next hour the setting is lowered gradually to 4
O
C
below the original while the fan speed setting is low.
After the second hour, the temperature and fan speed
settings are not changed.
Night well being mode operation is not available for
dehumidifying only.
Night well being mode operation can be halted at any
time (ideally when you wake in the morning) by pressing
T3 again.
At this stage the temperature and fan speed settings made
prior to starting Night well being mode go back into
effect.
3.4.12 Setting programs for operation
The air cond itioner logic provides the user with a choice
of two operating programmes that can be set to start and
stop at programmed times, for example you might want
the air conditioner to start shortly before you return
home so that it is cool when you get there.
To use these functions it is first necessary to set the
exact time on the remote control and then set the time
for the programs to start.
3.4.13 Setting the correct time
a. Press button T6, as many times as necessary to
display the hour indicator (H).
b. Press the toggle button T7 to increase or decrease
the numerical display until it shows the correct
hour.
c. Press button T6 again to display the minute indictor
( M )
d. Press the toggle button to increase or decrease the
numerical display until it shows the correct minute.