Verine 91154AA, Инструкция по установке и эксплуатации

Страница: 19 / 28

19
D5 External air intake switch
D6 Night operation switch
D7 Automatic operation switch
D8 First operating program switch
D9 Second operating program switch
D10 Temperature indicator (thermometer) or time
indicator( H M)
The remote control is also equipped with a cover with a
cursor that can be positioned so as to only permit access
to the ON/OFF, AUTOMATIC MODE and NIGHT
MODE buttons.
With the cover in this position the air conditioner can be
used but none of the settings altered.
3.4.2 Switching on and control of operation
In order to operate the machine via the remote control,
the power to the unit should be switched on.
Once this operations have been carried out, the machine
may be regulated using the remote control.
To send commands to the air conditioner, point the front
of the remote control toward the air conditioner control
panel.
The device emits a beep when it receives a command.
The maximum distance for transmission of commands is
about 8 metres.
3.4.3 Switching the unit on and off (T1)
This button turns the machine on and off.
The machine’s control system has a memory, therefore
any setting will not be lost when it is turned off.
This button serves to switch the unit on or off for brief
periods of time.
In case of prolonged non use of the machine it must be
switched off by turning the main switch off or
unplugging from the mains.
3.4.4 Well being mode (Automatic) (T2)
By using this button the machine is automatically
regulated in order to create an optimal comfort
temperature in the air-conditioned room.
The machines temperature is automatically regulated
according to the rooms temperature.
The fan speed is also automatically regulated according
to the set temperature (except in dehumidification use).
3.4.5 Cooling function (T4)
When used in this mode, the air conditioner
dehumidifies and cools the room.
Button T4 is used to select the op erating mode.
Press until the snowflake appears on the display.
First set the desired temperature and fan speed (see the
relative paragraphs)(T7)
After three minutes (max), the compressor should start
up and the air conditioner should start cooling the room.
When the compressor starts you will see a green LED
light up on the control panel.