Verine 91154AA, Инструкция по установке и эксплуатации

Страница: 17 / 28

17
CHAPTER 3 USE AND MAINTENANCE (for the user)
CHAP. 3.1 Important Recommendations
Installation and connection of the air conditioner should
be carried out by a qualified or competent person.
The Instructions for installation are provided in the earlier
sections.
No structural object (furniture, curtains, plants, leaves,
blinds, etc.) should ever obstruct the normal flow of air
from either the internal or external grille.
Never lean or sit on the casing of the air conditioner as
this could cause serious damage to the external parts.
Do not turn the horizontal airflow baffles by hand.
Always use the remote control to adjust the baffle
position.
If the unit leaks water switch it off immediately and
disconnect it from the mains.
Call VERINE TECHNICAL SERVICE
Phone 01787 472551
Fax 01787 272316
When the air conditioner is heating it has to periodically
eliminate any ice that could form on the air outlet
radiator. While it is doing this the machine keeps running
but does not heat t he room. This lasts for a brief period of
time, from 3 to a maximum of 10 minutes.
The air conditioner must not be installed in rooms where
excessive gasses develop or where there are conditions of
heat and humidity beyond the maximum limits indicated
in the installation section.
Clean the air filter periodically, as described in the
specific paragraph.
3.2 Names of Parts
3.2.1 List of Units
1. Air outlet grille.
2. Louvres for lateral adjustment of airflow.
3. Motor-operated air baffles for upward airflow.
4. Alarm display console.
5. Air intake grille.
6. Grips for removal of air filter.
7. Rubber hose with cap on end for evacuation of
condensation water in case of emergency.
8. Power cable.
3.2.2 Description of signal console.
1. Remote control lens.
2. Green LED indicating machine is running (When the
machine is on stand-by this light is off).
3. Orange LED indicates on/off programming is in use.
4. Green LED indicates cooling compressor is on.
5. Red LED indicates air filter is clogged.
6. Service switch (RESET).