Verilink WANsuite 6450, Справочное руководство

Страница: 81 / 205

W e b S e r v e r I n t e r f a c e 3-53
Next Hop IP Address of the next device in the route.
Cost Cost of using that route.
Route Status Indicates whether a route is enabled or disabled.
The Static Routes Table screen provides the following user-activated buttons:
Route Details Screen
Access the Route Details screen (Figure 3.45) by clicking on the appropriate
numbered link under the “Index” column on the Static Route Table screen.
To establish a new route or to change the parameters of an existing route,
enter the desired values in the available parameter fields and press the
“Submit” button.
NOTICE:
A “Submit” on this screen will activate a newly created route. It is not
necessary to perform a “Save and Restart” for the route to take effect.
Figure 3.45 Route Details Screen
Endpoint Endpoint name (or interface) through which to send the IP packet to reach the
Target IP Address.
Target IP Address Represents the target network that you want this router to reach.
Values: 0.0.0.0
−
255.255.255.255
Default: 0.0.0.0
Target IP Mask Mask of the target network.
Values: 0.0.0.0
−
255.255.255.255
Default: 0.0.0.0
Button Function
Dynamic Route Table Displays routes learned via RIP or OSPF.
Add New Adds a new static route.