Verilink WANsuite 6450, Справочное руководство

Страница: 110 / 205

4-2 W A N s u i t e 6 4 5 0
this cursor in different ways, depending on the program you use. Most
programs allow use of the “Tab” key and the “Shift+Tab” keys. Others allow
use of the arrow keys.
NOTICE:
If you are using Hyperterm and are unable to use your arrow
keys, access the pull-down menu under “Terminal,” click on
“Preferences,” and be sure the “VT100 Arrows” box is checked.
For keyboards that do not have these standard keys or have only some of
them, an alternative set of cursor control commands is provided. Perform each
command by pressing a letter key while holding down the “Ctrl” key. You
may use the alternative commands and keyboard commands listed below
interchangeably at your discretion.
You can navigate further within a menu as described below.
Field Types
Each menu screen is composed of fields. The two basic field types are user-
selectable (most of these are in brackets or parentheses) and display-only (no
brackets or parentheses). If you can move the highlighted cursor to a field,
that field is user-selectable; all other fields are display-only. User-selectable
fields are those in which you can make changes or execute commands. To
save changed parameters, press the “Enter” key while on any user-selectable
field or link to a submenu (screen). If you make changes to a screen and then
“Esc” out of the screen, you will see a prompt at the bottom of the screen:
“Save Changes (Y) or Discard Changes (N).” To save changes, press “Y” or
“y”; to discard changes, press “N” or “n” or “Esc.” If the VT100 session
times out, you will be logged off without the unit’s having saved any changes.
Fields enclosed in brackets [ ] offer a list of selections from which to choose.
The selections may be made by pressing your Spacebar to “toggle” between
choices. Each time the Spacebar is pressed, a new item appears. When the
item you wish to choose is displayed, press the “Esc” key to save it.
Fields enclosed in parentheses ( ) are manipulated by one of the following
two methods. The first is to press the “Enter” key to simply execute the
function. The most common type of field in parentheses accepts typed input
in the form of letters and/or numbers. Typing characters when the field is
highlighted causes the current entry to be replaced by the new characters. To
Keyboard Command Alternative Command
Left Arrow Ctrl+S
Right Arrow Ctrl+D
Up Arrow Ctrl+E
Down Arrow Ctrl+X
Backspace Ctrl+H
Delete Ctrl+Z