Verilink WANsuite 6450, Справочное руководство

Страница: 67 / 205

W e b S e r v e r I n t e r f a c e 3-39
*This rate is proprietary to the GlobeSpan chipset and is required for unstructured E1 CES service.
To allocate a channel for the CBR interface, set the channel’s “Rate”
parameter according to the table shown on page 3-36 and the Service
parameter to the Service Index for the CBR interface (4). To allocate a
channel for the Serial Interface, refer to the paragraphs below.
Serial CES Configuration
The WANsuite 6450 has the capability to multiplex/demultiplex the Serial
interface data stream with the CBR interface data stream. The multiplexing/
demultiplexing is external to the AAL1 SAR; the user controls it by designating
time slots for the CES service on the CBR or Serial port. To configure the Serial
interface for CES service, perform the following steps:
1
On the Services screen (Figure 3.23 on page 3-25), click on the Service
Index associated with the Serial interface (5). This will cause the unit to
display the Service Details screen for the Serial interface. On the Service
960 13 12 12
1024 14 13 14
1088 15 14 14
1152 15 15 16
1216 16 16 16
1280 17 17 18
1344 18 18 18
1408 19 18 19
1472 20 19 20
1536 21 20 20
1600 22 21 22
1664 22 22 22
1728 23 23 24
1792 24 24 24
1856 25 24 24
1920 26 25 24
1984 27 26 24
2048 28 27 24
2112 29 28 24
2176 30 29 24
2240 30 30 24
2304 31 30 24
2312* 31 30 24
SHDSL
Data Rate
(kbps)
Maximum Number of CES Channels
Structured Nx64
Basic Service
Structured Nx64
with E1 CAS Service
Structured Nx64
with T1 CAS Service