VeriFone Omni 3200M, Руководство по установке

Страница: 22 / 41

17
Omni 3200M Installation Guide
Step 7: Connect the Terminal Power Pack
Having installed any optional peripheral(s), you can now
connect the Omni 3200M to a power source:
1. Insert the round connector that is on the end of
one of the two power pack cables into the
power port on the back panel of the terminal
(see Figure 14). The power port is identified by
the “electrical power” icon, shown to the right.
Note: The round connector on the power pack cable is a lock-
type device that is designed to prevent the power cable from
accidentally being disconnected from the terminal:
To insert the end of the connector into the
power port, align the connector so the plastic
locking part that projects from the connector is
pointing upward. When the connector is in
position, twist it to the left (as indicated by the
word “LOCK” on the connector) toward the
“locked” icon on the left side of the power
port. The “locked” icon is shown to the right.
To remove the power cable from the terminal,
and to disconnect the terminal from its power
source, turn the connector to the right, toward
the “unlocked” icon on the upper right of the
power port, and remove it from the port. The
“unlocked” icon is shown to the right.
2. To complete the power connection, plug the metal prongs
on the end of the other power pack cable into an electrical
power outlet (see Figure 14).