VeriFone Omni 3200M, Руководство по установке

Страница: 13 / 41

Omni 3200M Installation Guide
8
Telephone Line Ports
• On the left side of the back panel are two RJ11-type
modular jacks for optionally connecting the wireless
terminal to a telephone line:
The first port is identified by a telephone-
shaped “Telset” icon (shown to the right). You
use the Telset port to connect the Omni 3200M
to a telephone base unit.
The second telephone line port is identified by
a jack-shaped “Telco” icon (shown to the
right). You use the Telco port to connect the
Omni 3200M to a modular telephone wall jack.
Ports for Attaching Optional Peripherals
• There are two RJ45-type modular jacks (serial ports) for
connecting optional peripheral devices:
The first serial port is identified by an “RS232”
icon (shown to the right). You use this port to
connect a VeriFone CR 600 check reader, or
another type of serial device.
The second serial port is identified by “Bar
Code” and “PIN Pad” icons (shown to the
right). You use this port to connect a PIN pad,
smart card reader/writer, or bar code wand.
Power Pin Connector Port
• On the lower right-hand side of the back of the
terminal is a port for connecting the terminal to
a power source. This port is identified by an
“electrical power” icon (shown to the right).