VeriFone Omni 3200M, Руководство по установке

Страница: 15 / 41

Omni 3200M Installation Guide
10
Note:
Do not remove the rubber sleeve that is attached to the
antenna. Do not place any kind of obstruction near the antenna
or place any object on the antenna itself, as this may prevent
the radio module from operating properly.
Step 5: Connect the Terminal to a Telephone Line
(Optional)
The Omni 3200M terminal performs normal transactions over
the BellSouth Intelligent Wireless Network. However, to
perform special operations such as software downloads or
upgrades, a land-based telephone line connection is required.
You can connect the Omni 3200M to a telephone line in one of
two ways — direct (the preferred method) or pass-through:
• Direct connection . The telephone line cord runs from the
Telco port directly to a RJ11-type telephone company wall
jack. With a direct connection, telephone line usage is
dedicated to the terminal.
• Pass-through connection . The telephone line cord runs
from the Telset port on the back of the terminal to a RJ11-
type jack located on a standard telephone base unit.
The telephone you use for a pass-through connection must
be fully functional and must have two RJ11-type modular
jacks on its base: one for the direct connection of the
telephone and another for the Omni 3200M connection.
With this type of connection, the line is busy when the
terminal is using it to dial in to a host computer, or when a
host computer is dialing in to the terminal.