Verex VeDVR, Руководство пользователя

Страница: 47 / 69

21-0421E rev1.1
VeDVR User Guide 39
Exception Menu
Exceptions are conditions the DVR can respond to in different ways
Highlight the Exception icon in the Main Menu and press “ENTER” at the DVR controls, remote control or left click
with a mouse to open the configuration screen.
To make selections in this screen,
1. Use the “ ◄ ”, “ ► ”, “ ▲ ” and “ ▼ ” arrow buttons on the DVR controls or remote control or mouse pointer to high light
the screen selections.
2. Press “EDIT” to change a selection
3. Use
“ ▲ ”, “ ▼ ” to change the selection. Left click the mouse to change the selection.
4. Press “ENTER” to save a selection and return to the Image Menu.
5. After making changes, press Confirm to save the changes or Cancel to not save the changes.
Exception:
Select from the following exceptions.
• Hard Disk Full
• Hard Disk Error
• Network Failure
• Illegal Access
• NTSC/PAL Mismatch
• Hardware Changed
• IP Address Conflict
Control Method:
Use “ENTER” or “EDIT” at the DVR controls or remote control or left mouse click to enable the following selections by
changing the “
x
” to a check mark: “ 9 ”.
Audible Warning:
Turn DVR alert tone on or off.
Upload To Main PC:
Send exception information to central host PC.
Trigger Alarm Output:
Turn on a DVR output. Select any or all of the displayed output numbers.
Send Email:
Email notification.
Notify RSE:
Contact Remote Service Environment
Press Confirm to save changes or Cancel not to save changes and return to the Main Menu.