manualshive.com logo in svg

Verex VeDVR, Руководство пользователя

Поделиться
Скачать
Verex VeDVR Скачать руководство пользователя страница 28

 

20 

VeDVR User Guide 

21-0421E rev1.1

 

 

 

 

Motion Alarm Control 

1.  Highlight the Procedure button to the right of the Mot(ion) Det(ection) Area button in the “Camera Input 

Adjustment” sceen. 

2.  Press “ENTER” to display the Motion Alarm Control menu. 

 

 

Motion Alarm Record Channel Setup 

When a motion alarm has occurred, the related camera(s) can be turned on to start recording. In the Motion Alarm 
Control menu, select one or more camera record channels. 

•

 

Use “ENTER” or “EDIT” to enable the channel. The “

x

” changes to “

9

” to enable the function. 

NOTE: Recording must be enabled and the Recording Type must be set to Motion Detection, Motion & Alarm or 
Motion or Alarm in order for the cameras to start recording when motion is detected.

 

Alarm in Schedule

 

Setup a schedule to determine when the Motion Alarm will be activated. 

Ensure that adequate time periods are set to avoid missing possible occurrences. 

When a Motion Alarm occurs within the defined schedule, the DVR will respond with one or more of the selectable 
Control Methods. A maximum of 4 periods can be setup for each day of the week. The schedule of one day can be 
copied to another. 

Содержание VeDVR






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды