VERDER JEC JRZP Series Скачать руководство пользователя страница 18

Страница: 18 / 59

Rotor Clearance

Rotor clearance must be precisely maintained to provide maximum pumping efficiency, yet prevent

contact between rotors, rotor case, and front cover during operation.

If pumping efficiency is lower than expected or if parts contact has occurred during operation (Within

rated differential pressure), check the rotor clearances and adjust, if incorrect.

Standard Rotor Clearances (mm)

Material

Clearance \ Model No.

ZP015

ZP030

ZP060

ZP130

Illium8

Back Face

0.05

0.10

Rotor to Body

0.05

0.13

Front Face

0.13

0.20

SUS316L

Back Face

0.15

0.25

Rotor to Body

0.15

0.28

Front Face

0.23

0.35

There are two areas of rotor clearances as illustrated following:

Rotor tip clearance; not adjustable set by manufacturer

Front and back face clearance; adjustable by shim

Rotor thickness and body depth are fixed at manufacturer. Therefore, with the correct rotor size

selected, the only maintenance adjustment that can be made is the proportion of front and rear

clearance. Measure the front clearance as follows:

The rotor to rotor housing back face clearance is maintained by the shim(s) (45).

Check that the rotor case is tight to the gearbox (1A). And check the rotor bolts (35) are tight.

Measure the clearance between the back face of the rotor case and the back of the rotor with

a feeler gauge with reference of the above recommended back face clearance.

If incorrect, adjust by adding or removing shim(s) (45) from behind the rotor case.

Check each rotor and adjust as necessary.

Fig. 33

Содержание JEC JRZP Series




























































Результаты поиска

Содержание JEC JRZP Series

Отзывы:

Бренды по названию

Популярные бренды

VERDER JEC JRZP Series, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание JEC JRZP Series

Отзывы:

Бренды по названию

Популярные бренды