Verdemax 4330 Скачать руководство пользователя страница 16

16

heat, and can cause damage to the nervous and circulatory
systems and to necrosis.
Not all factors that lead to Raynaud’s syndrome are known,
but  cold  water,  smoking,  and  illnesses  that impact  the
blood  vessels  and  the  circulatory  system and severe or
long-lasting exposure to vibrations are known to be factors
that contribute to the development of Raynaud’s syndrome.
Observe the following instructions to reduce the risk of
Raynaud’s syndrome and Carpal tunnel syndrome:
• Wear gloves and keep your hands warm.
• Make sure the device is well maintained. A tool with loose

components or with damaged or worn dampers is prone
to increased vibration.

• Always hold the handle firmly, but do not grip it

continuously with excessive pressure. Take breaks often.

All of the precautions indicated above cannot exclude the
risk of Raynaud’s syndrome or Carpal tunnel syndrome.
Therefore, it is advisable in case of long-term or regular
use to monitor the condition of your hands and fingers
closely. Seek medical attention immediately if any of the
above symptoms appear.

Safety instructions

Attention!

  Read all instructions contained herein.

Failure to observe the  following instructions may
result in electric shock, burns and/or severe injury.
The term “power tool” used in the following includes
both mains-operated tools (with mains supply) and
battery-operated tools (without mains supply).

KEEP THESE INSTRUCTIONS CAREFULLY!

1) Instructions regarding to safe handling

a) Wear goggles or properly fitted safety glasses, sturdy

closed shoes with non-slip soles, gloves, snug-fitting
work clothes and ear protectors (ear plug or ear
mufflers)

b) Minors should never be allowed to use an electric

trimmer. Never lend or rent your electric trimmer
without these operating instructions.

c) Do not use the trimmer if other persons, above all

children, or animals are near the working area. Keep
away at least 15 m.

d) Work calmly and stay alert. Operate the trimmer under

good visibility and daylight conditions only.

e) Before using the machine, the line and extension cords

have to be checked for signs of damage or ageing.
Do not use the trimmer when the cords are damaged
or worn.

f) Do not use damaged power supply cords, extension

cords, couplings, plugs or cutting heads.

g) Careless use can cause injuries to hand and feet by

the rotating cutting elements. Do not switch on the
unit when hands or feet are near the cutting elements.

h) Never use metal cutting devices.

i) Only use original spare parts.
j) Remove the battery before testing, cleaning or working

on the machine and when it is not in use;

k) Inspect cooling air slots on the motor housing at

regular intervals for clog-ups and clean as necessary.

2) Maintenance

a) Children should be under supervision to ensure that

they do not play with the device.

b) Any other work should be performed by your dealer.
c) Never use metal or any kind blade cutting devices.
d) Clean the cutting head at regular intervals.
e) Check the condition of the cutting head at frequent

intervals. If the behaviour of the cutting head changes
(vibration, noise), check immediately as follows: Switch
off the trimmer, hold it firmly and bring the cutting
head to a standstill by pressing it against the ground.
Then disconnect plug from power supply. Check
condition of cutting head - look for cracks.

f) Have a damaged cutting head replaced immediately

- even if it only has superficial cracks. Never attempt
to repair a damaged cutting head.

g) Inspect cooling air slots on the motor housing at

regular intervals for clog-ups and clean as necessary.

h) Clean plastic parts with a damp cloth. Do not use

aggressive cleaning chemicals.

i) Never hose down the electric trimmer!
j) Store trimmer indoors in a dry, high or locked place

and always keep out of reach of children.

3) General Instructions

1. Read the instructions manual.
2. Have your dealer or a specialist show you how to

operate your trimmer.

3. Before using the machine check that your accu is in

good condition and that there is no damage. Never
use the trimmer with a damaged cutting head

4. Do not put the trimmer (lawn edge trimmer) into

operation if it is visibly damaged or worn.

5. Attention! Danger. The cutting head continues to rotate

after switch-off (flywheel effect). Keep your finger and
feet well clear to avoid injury.

6. Before starting work check that your accu-trimmer is in

good condition and that it is operating properly. Pay
special attention to the accu, switch and cutting head.

7. Transporting the electric trimmer, e.g. carrying it to

another site: Switch off the unit, disconnect the plug.

4) Operational Precautions

1. Make sure the open side of the protection guard is

pointing away from yourself before you switch on the
trimmer.

2. Wear goggles or properly fitted safety glasses, sturdy

closed shoes with non-slip soles, gloves, snug-fitting work
clothes and ear protectors (ear plugs or ear mufflers).

Содержание 4330





















Отзывы: