Verathon BLADDERSCAN BVI 6400, Руководство по эксплуатации и техническому обслуживанию

Страница: 35 / 48

29
Operations & Maintenance Manual: Maintenance & Troubleshooting
13. If the calibration scan was successful, Scan Point
®
reinstalls the device software, and then the message
“Calibration Successful” appears in Scan Point. You may remove the device from the Scan Point docking
station.
If the calibration scan was not successful, then you are prompted to rescan the calibration tank. Ensure
that the tank has sufficient water and the target is properly positioned, and then repeat Step 9 through
Step 12. After three unsuccessful calibration attempts, you will need to contact Verathon
®
Customer Care
in order to continue.
14. If you would like to print a certificate of calibration, in Scan Point, click the link
Click Here for Printable
Certificate of Calibration . The Calibration Report appears.
WARRANTY
Verathon products and software are warranted against defects in material and workmanship according to
the Terms and Conditions of Sale. This limited warranty applies as long as it is covered by the Scan Point Total
Reliability
SM
Plan. Warranty coverage applies to the following system components:
• BladderScan BVI 6400 device
• Scan Point
®
docking station
Additional reusable components purchased either singularly or as a part of a system are warranted separately.
Consumable items are not covered under this warranty.
For more information about your warranty or to purchase a Scan Point Total Reliability
SM
Plan that extends
the limited warranty on your system, please contact Verathon Customer Care or your local representative.