Verathon BLADDERSCAN BVI 6400, Руководство по эксплуатации и техническому обслуживанию

Страница: 15 / 48

9
Operations & Maintenance Manual: Introduction
OPTIONAL COMPONENTS & ACCESSORIES
The following optional items are available to enhance the capabilities of your device. Please contact
Verathon
®
Customer Care or your local representative for more information on any of the following Verathon
products.
Table 2. Optional Components and Accessories
PART DESCRIPTION
Local Client Local Client
Scan Point, Verathon and the Verathon Torch are
trademarks of Verathon Inc. ©2017 Verathon Inc.
Verathon Inc.
20001 North Creek Parkway
Bothell, WA 98011, USA
Tel: 800 331 2313 (USA & Canada only)
Tel: 425 867 1348 Fax: 425 883 2896
Verathon Medical (Europe) B.V.
Willem Fenengastraat 13
1096 BL Amsterdam, The Netherlands
Tel: +31 (0) 20 210 30 91
Fax: +31 (0) 20 210 30 92
verathon.com 0900-1009
0900-1025-04-40
Scan Point
®
LC Software install CD
Installs Scan Point Image Management System on a stand‑alone
(non‑networked) Windows
® PC. For more information, see Scan Point
Image Management Technology (Optional).
Scan Point with QuickPrint Install CD
Installs Scan Point with QuickPrint software on a network‑enabled
Windows PC. For more information, see
Scan Point Image
Management Technology (Optional) .
Scan Point docking station
Used with Scan Point image management technology. Transmits data
from the BladderScan device to the Scan Point host computer and
simultaneously recharges the battery.
Calibration kit (requires Scan Point with QuickPrint software)
The calibration tank base holds a spiral‑shaped calibration target and
4.2 liters of water. The indentation in the tank lid places the device
in a known and repeatable location with respect to the spiral target.
Self‑calibration takes about 15 minutes.
Scan Point label writer
Prints exam results on adhesive label media. Requires installation
of Scan Point software on a Windows
® PC. The following items are
related to the Scan Point label writer:
• USB Cable—Connects the Scan Point label writer to the Scan Point
host computer.
• Power Cord—Connects the Scan Point label writer power adapter
to a wall outlet.
• Power Adapter—Connects the power cord to the label writer.
• Roll of Labels—Labels in roll format properly sized for the
Scan Point label writer.
Battery replacement kit
Contains a replacement lithium‑ion battery and instructions for
installing it.