Veolia ELGA CENTRA-LDS-US Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 57

Veolia ELGA CENTRA-LDS-US Скачать руководство пользователя страница 56

CENTRA – MDS/LDS/RDS US Operator Manual

ELGA

Page 50

CENTRA – MDS/LDS/RDS US Version 01 – 08/14

option, any product or part thereof that proves to be
defective in materials or workmanship within the warranty
period, provided the customer notifies VWS (UK)  Ltd
promptly of any such defect. The cost of labor for the first
ninety (90) days of the above warranty period is included
in the warranty; thereafter, labor cost shall be at the
customer’s expense. The exclusive remedy provided
herein shall not be deemed to have failed of its essential
purpose so long as VWS (UK)  Ltd is willing and able to
repair or replace any nonconforming VWS (UK)  Ltd
system or component part. VWS (UK)  Ltd shall not be
liable for consequential, incidental, special or any other
indirect damages resulting from economic loss or property
damage sustained by any customer from the use of its
process systems.

Products or components manufactured by companies
other than VWS (UK) Ltd or its affiliates (“Non- VWS (UK)
Ltd products”) are covered by the warranty, if any,
extended by the Product manufacturer. VWS (UK)  Ltd
hereby assigns to the purchaser any such warranty;
however,  VWS (UK) LTD EXPRESSLY DISCLAIMS ANY
WARRANTY WHETHER EXPRESSED OR IMPLIED,
THAT THE NON -  VWS (UK)  LTD PRODUCTS ARE
MERCHANTABLE OR FIT FOR A PARTICULAR
PURPOSE.

NOTICE

VWS (UK) Ltd is constantly striving to improve its
products and services. Consequently, the information in
this document is subject to change without notice and
should not be construed as a commitment by VWS (UK)
Ltd. Also, VWS (UK) Ltd assumes no responsibility for any
errors that may appear in this document. This manual is
believed to be complete and accurate at the time of
publication. In no event shall VWS (UK) Ltd be liable for
incidental or consequential damages in connection with or
arising from the use of this manual.

VWS (UK) Ltd warrants its products against defects in
materials and workmanship as described in the Warranty
statement on the preceding pages.

«
...
54
55
56
57
»

Содержание ELGA CENTRA-LDS-US


























































Отзывы:

Нет отзывов