Veolia ELGA CENTRA-LDS-US Скачать руководство пользователя страница 33

Страница: 33 / 57

ELGA

CENTRA – MDS/LDS/RDS US Operator Manual

CENTRA – MDS/LDS/RDS US Version 01 – 08/14

Page 27

Step 19 - Data transmit

The frequency of the data transmittal to the printer or PC is
selectable.

PRESS SCROLL

to change transmit intervals

(1,5,15,30min / 1,6 hour)

PRESS TICK



to proceed to step 20.

PRESS TICK



Note: PRESS PRINT during normal operation and data

will be transmitted to the recording device.

Step 20 - Remote control station selection (node
addressing)

Each remote control station connected to the

CENTRA

must be registered for its commands to be recognized.

Once registered the remote control station can be used
to adjust functionality and monitor alarms locally.

The viewing angle of each remote control station is
specific to its mounting position and should be adjusted
as described in Section 5.2, Step 16.

PRESS RESET

PRESS TICK



to complete settings (User

PASSkey)

PRESS TICK



to proceed to step 21 (Master

PASSkey only).

Note: At this stage the CENTRA screen may timeout

before each remote display are registered. This
does not affect registration of the remote display.

ENSURE the RS485 network is correctly installed
and terminated as described in ‘ELGA LabWater
Installation Guide - RS485 Local area Network
design considerations and installation guide’
(Available from ELGA LabWater Technical Support).

POWER ON remote control stations.

PRESENT user PASSkey (any colour) at each
remote display in the order that you wish them to be
registered.

Note: Re-enter the user menu and return to step 20 to

check the registration of the remote displays.

Data transmit screen

Remote control station

selection screen

Содержание ELGA CENTRA-LDS-US


























































Результаты поиска

Содержание ELGA CENTRA-LDS-US

Отзывы:

Veolia ELGA CENTRA-LDS-US, Руководство оператора, Страница: 33 / 57

Результаты поиска

Содержание ELGA CENTRA-LDS-US

Отзывы: