Venturo ET10KX, Инструкция по установке и эксплуатации

Страница: 32 / 64

TITLE SECTION
SUPERCEDES
DATE
711006
WC 200
10-23-97G
5-26-06H WIRE ROPE SPECS
VENTURO WINCH & CRANE
SELECTION
The chart below shows the maximum working load and breaking strength of 7 X 19 Galva-
nized AIRCRAFT Grade Wire Rope in various diameters. The breaking strength is 3-1/2
times the maximum working load. Do not use wire rope with a Maximum Working Load rating
less than the single line capacity of the crane. Use of wire rope diameter larger than the size
furnished with the crane will reduce the fatigue life of the wire rope.
WIRE ROPE DIAMETER MAXIMUM WORKING LOAD BREAKING STRENGTH
1/8" 570 lbs 2000 lbs
5/32" 800 lbs 2800 lbs
3/16" 1200 lbs 4200 lbs
7/32" 1600 lbs 5600 lbs
1/4" 2000 lbs 7000 lbs
5/16" 2800 lbs 9800 lbs
3/8" 4114 lbs 14400 lbs
CINCINNATI, OHIO
MFG., INC.
INSTALLATION
1. Unwind coil of rope by rolling it along floor. This will prevent kinking.
2. Most VENTURO Cranes are provided with a slot in the winch drum side plate for attaching the
end of the wire rope with a stop collar. A hole in the housing allows access for the end of the
wire rope when inserted thru the slot.
The ET20K(X) & ET25K(X) Cranes have a clamp built into the winch drum and do not use a
stop collar.
3. THERE MUST ALWAYS BE AT LEAST (3) TURNS OF WIRE ROPE ON THE DRUM WHEN
UNDER LOAD.