Vents DVUT 300 P1B EC, Руководство пользователя

Страница: 13 / 28

13
www.ventilation-system.com
HV2 HUMIDITY SENSOR MOUNTING
Install the HV2 humidity sensor in the extract air duct. Humidity sensor is not included in the delivery set and is available as a specially
ordered accessory.
To install the humidity sensor first open the air handling unit and fix the sensor on the holder located on the wall of the extract air duct.
Insert the plug connector with the cable from the control unit (pre-wired at works) in the socket connector of the humidity sensor.
Update the control configuration after connection of the sensor. Contact the product Seller for doing that.
1
2
3
Plug for
connection t
o the controller
Humidity sensor
Bracket
Socket
for connection
to the humidity sensor
RH, CO
2
OR VOC SENSOR MOUNTING
The RH, CO
2
or VOC sensor must be installed in the extract air duct. RH, CO
2
and VOC sensors are not included in the delivery set and
are available as specially ordered accessories.
To install the CO
2
, RH or VOC sensor open the unit and unscrew the holder that retains the inner partition box, then take off this box.
Then disconnect the connector (pre-wired at works) on the cable from the control unit. Disassemble the sensor as described in the
installation instruction and wire it according to the wiring diagram. Assemble the sensor in the reverse order and fix it on the holder.
Update the control configuration in the controller after connection of the sensor. Contact the product Seller for doing that.
CO
2
(RH, VOC) sensor
1
2
3
Bracket
1
2
3
Wiring diagram for connection of RH. VOC and CO
2
sensors to the control unit
3
supply voltage 24 V AC / DC
GND
Output 0-10 V CO
2
xpm
CO
2
sensor (DPWQ402000) wiring
2
1
1
2
8
VOC sensor (DPWQ306000) wiring
2
GND
supply voltage 24 V AC / DC
Output air quality 0-10 V
3
1
1
2
4
3
supply voltage 24 V AC / DC
GND
Output 0-10 V
From the unit
controller
From the unit
controller
From the unit
controller
RH sensor (DPWC112000) wiring
2
1
1
4
5