16
DVUT PB EC
www.ventilation-system.com
TH-TUNE (A17) CONTROL PANEL MOUNTING
Use a junction box with a minimum diameter of 65 mm and a minimum depth of 31 mm for installation of the back side of the control panel.
1. Detach the front side of the control from the back part using a
screwdriver.
2. Detach a four-pin socket from the front side of the control panel.
3. Complete wiring in compliance with the wiring diagram.
4. Fasten the back side of the control panel in the junction box using the supplied screws.
5. Re-attach the four-pin socket. Press the control panel to click.
6. Lay all the wires inside of the control panel and install the control panel from below. Press the panel to click and close.
4
5
6
4
5
6
74
60
74
60
Overall dimensions of the back side of the
control panel [mm]
The outline drawing of the back part of the control panel is shown
on the left.
.
Содержание DVUT 300 P1B EC
Страница 25: ...25 www ventilation system com ...
Страница 26: ...26 DVUT PB EC www ventilation system com ...
Страница 27: ...27 www ventilation system com ...
Страница 28: ...V177EN 01 ...