www.ventsus.com
MIU_54(MICRA_150)-01
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: (513)348-3853
e-mail: [email protected]
AIR HANDLING UNIT WITH HEAT RECOVERY
MICRA 150
INSTALLATION GUIDE
INSTALLATION
Tools required
Pencil
Drill 2 Ø 1⁄4"
Screwdriver
Dowel Ø8 (Ø 5/16''), 80 mm (3 1/7'')
4 pcs.
Screws Ø 8 (Ø 5/16''), 80 mm (3 1/7'')
4 pcs.
MOUNTING
Mount the unit to provide enough access for maintenance or repair operations.
The wall for mounting must have even surface. Any surface irregularities will lead to unit casing skew and may prevent the unit from operating properly. The minimum distances
from the unit to the mounting surfaces are shown in fig. 1.
min 12’’ mm
min 12’’ mm
Fig. 1. Minimum distance from the unit to the surfaces
