Vendo VARI-PAK 450, Руководство пользователя

Страница: 48 / 113

PG-16
07/2003
PG-17
07/2003
To set the stop time
• Press selection button #2 (up) when the display reads Start Time .
•
Press selection button #4 when the display reads Stop Time .
• Press selection button #4 when the display reads Stop Day .
•
Press selection button #2 (up) or selection button #3 (down) to cycle through the days
or Every Day.
• Press selection button #4 to change the status of the days. If the status is On , the days
will be disabled during the blocked time(s). If the status is Off , the days will remain
enabled during the blocked time(s).
•
Press selection button #2 (up) or selection button #3 (down) to toggle between
On/
Off .
• Press selection button #4 to save the setting and exit the submode.
•
Press selection button #2 (up) to advance to Stop hh:mm .
• Press selection button #4 and the hour setting will begin to blink indicating that it is
ready to be edited.
•
Press selection button #2 (up) or selection button #3 (down) to choose the desired
stop hour. The time is in a 24-hour format.
•
Press selection button #4 and the minutes will begin to flash.
• Press selection button #2 (up) or selection button #3 (down) to choose the desired
stop minutes.
•
Pressing selection button #4 will save your settings.
• Press selection button #1 to return to Stop Time .
•
Pressing selection button #1 again, will return you to the Sales Block 1 or 2 mode.
Discount
Allows you to program the machine to discount beverages at regular intervals.
To program the Discount feature, you must enter the following information:
Discounted Selection – The selections to be offered at a discounted price.
Start Time – The time that the discount begins.
Start Day – The days that the discount is offered.
Stop Time – The time that the discount ends.
Stop Day
– The days that the discount ends.
Amount - The amount subtracted/discounted from the original vend price.
To set the discounted selections
• Press selection button #4 when the display reads Discount .
•
The display will read
Enable X
•
Enable Off = The discount function is off/disabled/inactive
• Enable On = The discount function is on/enabled/active
•
To change the Enable status, press selection button #4.
• Use selection button #2 (up) or selection button #3 (down) to cycle through the
available options.