Vendo VARI-PAK 450, Руководство пользователя

Страница: 45 / 113

PG-12
07/2003
PG-13
07/2003
•
Press selection button #4 when the display reads Refrigeration.
• The display will read Setpoint .
•
Press selection button #4 and the display will read the current setpoint temperature.
NOTE: The machine is set at 36°F from the factory.
•
Press selection button #4 and the temperature will begin to flash.
•
Pressing selection button #2 (up) or selection button #3 (down) will cycle you
through the following settings:
Cut-in Temperature (F) 34 35 36 37 38 39 40 41 42
Cut-out Temperature (F) 30 31 32 33 34 35 36 37 38
Nominal Temperature (F) 32 33 34 35 36 37 38 39 40
Nominal Temperature (C) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
•
Press selection button #4 to save the setting.
•
Press selection button #1 to return to the Setpoint mode.
• Press selection button #2 (up) to advance to the next submode.
•
Press selection button #4 to access the temperature reading.
• Press selection button #1 to exit this mode.
•
Press selection button #2 (up) to advance to the next submode.
•
The display will show the current degree scale F or C (Fahrenheit or Celsius).
• Press selection button #4 to change the current setting.
•
Use selection button #2 (up) or selection button #3 (down) to toggle between Celsius
or Fahrenheit.
•
Press selection button #4 to save the setting and exit the mode.
•
Press selection button #2 (up) to advance to the next submode.
• Press selection button #4 to access the Fan X mode.
•
Fan Disable = The evaporator fan will be turned off/on with the activation of the
compressor.
•
Fan Mode 1 = The evaporator fan will turn off 5 minutes after the compressor fan
is turned off. When the compressor is turned on, the evaporator will turn on at the
same time.
•
X will be flashing.
• Press selection button #2 (up) or selection button #3 (down) to toggle between
Disable/Mode 1/Mode 2.
•
Press selection button #4 to save the setting.
• Press selection button #1 to exit this mode.
•
Press selection button #2 (up) to advance to the Periodic Defrost mode.
• On/Off will be flashing.
•
Press selection button #2 (up) or selection button #3 (down) to toggle between
On/
Off .