Vendo VARI-PAK 450, Руководство пользователя

Страница: 47 / 113

PG-14
07/2003
PG-15
07/2003
To choose the selections:
• Press selection button #4 when the display reads Sales Block 1 or 2 .
•
The display will read Enable X
• Enable Off = The block function is off/disabled/inactive
•
Enable On = The block function is on/enabled/active
•
Enable Light = The block function is on and the lights are off when blocking occurs.
• To change the Enable status, press selection button #4.
•
Use selection button #2 (up) or selection button #3 (down) to cycle through the available
options.
•
Press selection button #4 to save the status change and return to the
Enable
submode.
•
Press selection button #2 (up) to advance to Selections.
• Press selection button #4 to change the status of the selection buttons during the blocking
mode.
• Press selection button #2 (up) or selection button #3 (down) to cycle through the available
selections or
All Selections.
•
Press selection button #4 to change the status of the selections. If the status is On , the
selections will be disabled during the blocked time(s). If the status is Off , the selections will
remain enabled during the blocked time(s).
• Press selection button #2 (up) or selection button #3 (down) to toggle between On/Off .
•
Press selection button #4 to save the setting.
•
Press selection button #1 to return to Selections .
To set the start time
• Press selection button #2 (up) when the display reads Selections .
•
Press selection button #4 when the display reads
Start Time
.
•
Press selection button #4 when the display reads Start Day .
• Press selection button #2 (up) or selection button #3 (down) to cycle through the days or
Every Day.
• Press selection button #4 to change the status of the days. If the status is On , the days will
be disabled during the blocked time(s). If the status is
Off
, the days will remain enabled
during the blocked time(s).
• Press selection button #2 (up) or selection button #3 (down) to toggle between On/Off .
•
Press selection button #4 to save the setting.
• Press selection button #1 to return to Start Day .
•
Press selection button #2 (up) to advance to
Start hh:mm
.
•
Press selection button #4 and the hour setting will begin to blink indicating that it is ready
to be edited.
•
Press selection button #2 (up) or selection button #3 (down) to choose the desired start
hour. The time is in a 24-hour format.
•
Press selection button #4 and the minutes will begin to flash.
•
Press selection button #2 (up) or selection button #3 (down) to choose the desired start
minutes.
•
Press selection button #4 to save your settings.
• Press selection button #1 to return to Start Time .