Vendo V-max, Руководство по безопасности

Страница: 2 / 16

S-2
A COMMITMENT TO SAFETY
The Vendo Company is committed to safety in every aspect of our product design. Vendo is
committed to alerting every user to the possible dangers involved in improper handling or
maintenance of our equipment. The servicing of any electrical or mechanical device involves
potential hazards , both to those servicing the equipment and to users of the equipment.
These hazards can arise because of improper maintenance techniques. The purpose of this
manual is to alert everyone servicing Vendo equipment of potentially hazardous areas, and to
provide
basic safety guidelines for proper maintenance.
This manual contains various warnings that should be carefully read to minimize the risk of
personal injury to service personnel. This manual also contains service information to insure
that proper methods are followed to avoid damaging the vendor or making it unsafe. It is also
important to understand these
warnings are not exhaustive. Vendo could not possibly know,
evaluate, or advise of all of the conceivable ways in which service might be done. Nor can
Vendo predict all of the possible hazardous results. The safety precautions outlined in this
manual provide the basis for an effective safety program. Use these precautions, along with
the service manual, when installing or servicing the vendor.
We strongly recommend a similar commitment to safety by every servicing organization. Only
properly-trained personnel should have access to the interior of the machine. This
will minimize the potential hazards that are inherent in electrical and mechanical devices.
Vendo has no control over the machine once it leaves the premises. It is the owner or
lessor’s responsibility to maintain the vendor in a safe condition. See Section I of this manual
for proper installation procedures and refer to the appropriate service manual for
recommended maintenance procedures. If you have any questions, please contact the
Technical Services Department of the Vendo office nearest you.
SAFETY RULES
•
Read the Safety Manual before installation or service.
•
Test for proper grounding before installing to reduce the risk of electrical shock and fire.
•
Turn off power switch or disconnect power cord from wall outlet before servicing or
clearing product jams. The vending mechanism can trap and pinch hands.
•
Use only fully-trained service technicians for Power- On servicing.
•
Remove any product prior to moving a vendor.
•
Use adequate equipment when moving a vendor.
•
Always wear eye protection, and protect your hands, face, and body when working near
the refrigeration system.
•
Use only authorized replacement parts.
•
Be aware of inherent dangers in rocking or tipping a vending machine.
•
Always turn power off before plugging or unplugging vendor to wall outlet.