Vemer EVO.DIN, Руководство пользователя

Страница: 20 / 32

- 48 -
Manual User Evo.din
English
TELEPHONE DIALLER
• The x.Code Wave (for land lines) or x.Code GSM (mobile network) series starters
are used to control the timed thermostat ON/OFF switch remotely.
• Start-up “ON” command : green light on x.Code GSM telephone starter or red
light off on x.Code Wave telephone starter.
In this condition, the timed thermostat goes to automatic running with the weekly
programme set.
Any “ON” commands received following this one will not alter the status.
• “OFF” command : red light on x.Code GSM telephone starter or red light on with
the x.Code Wave telephone starter.
In this condition, the timed thermostat is switched off (but the temperature set can
be maintained manually with the key, to be used as temperature
in winter).
Any “OFF” commands received following this one will not alter the status.
Code Model Description
VN782900 x.Code Wave Telephone starter
VN799300 x.Code GSM GSM telephone starter
Note: to operate as a starter, the timed thermostat has to be in
“automatic operating mode”.
Important:
• if the timed thermostat has been set to Off from the keyboard, the dialler
is not enabled;
• the telephone starter status is checked every 5 minutes.
TELEPHONE DIALLER