background image

 

 

VEMCO - VR2Tx Manual 

 

15 March 

2019

 

55 

 

9.4 

Warranty and Disclaimer 

 
 
 

 

AMIRIX Systems Inc. 

Warranty and Disclaimer 

WARRANTY 

AMIRIX Systems Inc., doing business under its trade name VEMCO, provides a one (1) year warranty period for the Product from date of shipment.  

 

VEMCO warrants that on the date of shipment all Products manufactured by VEMCO are free from defects in  material and workmanship under normal use and service. This warranty 

applies to the components necessary for equipment upgrades, i.e. the VR1/VR2 to VR2W upgrade. With respect to transmitter products, while VEMCO is able to predict battery life with 

some certainty, VEMCO cannot guarantee that these Products will remain functional while submerged for extended periods of time. This warranty does not apply to any equipment, materials 

or design supplied by Buyer or a third party; re-battery services provided by VEMCO; Products for which VEMCO has not received payment; problems that results from: external causes 

such as accident, abuse, misuse; servicing not authorized by VEMCO; usage not in accordance with Product instructions; failure to follow the Product instructions or failure to perform 

preventative maintenance; usage of accessories, parts or components not supplied by VEMCO. 

 

This warranty shall survive delivery only on the conditions and subject to the limitations set forth below. 

 

NOTICE PERIODS 

To receive a warranty remedy for a Product, Buyer must contact VEMCO’s Customer Support Department during the warranty period

 

to receive the Return Material Authorization (“RMA”) 

instructions. Each defective Product returned for warranty remedy must be shi

pped at the Buyer’s expense according to the RMA instructions and must include 

reasonable proof that the 

claimed defect is due to a matter embraced within the warranty set forth above and that such defect did not result from any act or omission of Buyer, including but not limited to any failure 

to operate and maintain the Product in accordance with VEMCO’s applicable written instructions.

 

 

REMEDY 

VEMCO’s liability, and the Buyer’s exclusive remedy under this warranty, as to a defect in material or workmansh

ip, is limited to the repair of such defect in the accessory, equipment or 

part in which the defect appears or, at VEMCO’s option, to the replacement of such accessory, equipment or part with a simila

r item free from defect. As to any item repaired by VEMCO or 

furnished as a replacement by VEMCO, VEMCO’s liability and the Buyer’s exclusive remedy to the repair or replacement of such 

item for any further defect in material or workmanship, 

provided VEMCO receives written notice at Halifax, Nova Scotia, of such further defect from BUYER within ninety (90) days after the repaired or replaced item is shipped to BUYER and 

provided that BUYER returns same to VEMCO as provided under “Notice Periods”.

 

 

RETURNED ITEMS 

All repairs, replacements and corrections described above shall be performed by VEMCO at its plant at Halifax, Nova Scotia, or at such other place as may be mutually agreeable, and with 

reasonable care and dispatch in order that the Product, accessory, equipment or part will not be kept out of service longer than necessary. Return to BUYER of a repaired, replacement, or 

corrected accessory, equipment, part or Product shall be at VEMCO’s expense. Title to and risk of loss of the Product, access

ory, equipment, or part returned to VEMCO pursuant hereto 

shall at all times remain with the BUYER, except that title to a returned accessory, equipment, part, or Product shall pass to VEMCO concurrently with shipment to BUYER of any item 

furnished by VEMCO to BUYER as a replacement therefore. VEMCO shall have only such responsibility for any Product, accessory, equipment, or part owned by the BUYER and in the 

possession of VEMCO as is chargeable by law to a bailee for hire, but shall not be chargeable for loss of use thereof. 

 

WEAR AND TEAR 

Normal wear and tear and the need for regular maintenance shall not constitute a defect under this warranty. 

 

DISCLAIMER AND RELEASE 

THE WARRANTIES, OBLIGATIONS AND LIABILITIES OF VEMCO AND THE REMEDIES OF BUYER SET FORTH HEREIN ARE EXCLUSIVE AND IN SUBSTITUTION FOR, AND 

BUYER HEREBY WAIVES AND RENOUNCES, ALL OTHER WARRANTIES AND OBLIGATIONS OF VEMCO AND ANY ASSIGNEE OF VEMCO AND ALL RIGHTS, CLAIMS AND 

REMEDIES OF BUYER AGAINST VEMCO, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO ANY NON-PERFORMANCE OR DEFECT IN THE 

PRODUCT OR IN ANY OTHER THING DELIVERED UNDER THIS AGREEMENT, INCLUDING BUT NOT LIMITED TO: 

(A)

 

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE; 

(B)

 

ANY IMPLIED WARRANTY ARISING OUT OF COURSE OF PERFORMANCE, COURSE OF DEALING OR USAGE OF TRADE; 

(C)

 

ANY  OBLIGATION,  LIABILITY,  CLAIM  OR  REMEDY  IN  TORT,  WHETHER  OR  NOT  ARISING  FROM  THE  NEGLIGENCE  OF  VEMCO  OR  ANY 

ASSIGNEE OF VEMCO, ACTUAL OR IMPUTED;  

(D)

 

ANY OBLIGATION, LIABILITY, RIGHT, CLAIM, OR REMEDY FOR LOSS OF OR DAMAGE TO THE PRODUCT, FOR LOSS OF USE, REVENUE, OR 

PROFIT WITH RESPECT TO THE PRODUCT; OR FOR ANY OTHER DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES; AND 

(E)

 

VEMCO MAKES NO REPRESENTATION THAT THE PRODUCT WILL NOT INFRINGE ANY PATENT OR OTHER RIGHTS OF ANY PERSON AND 

BUYER AGREES TO INDEMNIFY VEMCO AND HOLD VEMCO HARMLESS FROM ANY AND ALL CLAIMS AND LIABILITIES WITH RESPECT TO 

SAME TOGETHER WITH ANY CLAIMS AND LIABILITIES WITH RESPECT TO ANY INFRINGEMENT OF ANY PATENT OR OTHER RIGHTS OF ANY 

PERSON ARISING AS A RESULT OF BUYER'S PRODUCTS, TECHNOLOGY, ACTIVITIES, OR OTHERWISE. 

 

LICENSE AGREEMENT 

VEMCO grants to the Buyer a limited, personal license, with no right to sub-

license, to use the Intellectual Property (“IP”) and Embedded Software in the manner set out in the Documentation. 

The Embedded Software and IP are not sold to Buyer. All property rights, including Intellectual Property Rights, remain with VEMCO. All rights related to the Embedded Software not 
expressly licensed to the Buyer are reserved to VEMCO. BUYER shall not permit any person other than BUYER and its employees to use or make use of the Embedded Software and/or 

IP. BUYER shall not, and shall not permit any third party to, modify, adapt, translate, reverse engineer, decompile, disassemble, or create derivative works based on the Embedded Software 

and/or IP. This license is assigned to the Product with which you have acquired the Embedded Software and/or IP. If the Product purchased is a Transmitter product, be advised that the 

license life is equal to the operational life. 

 

EXPORT 

Products and associated materials supplied or licensed hereunder may be subject to various export laws and regulations. It is the responsibility or BUYER to comply with such laws and 

regulations. 

 

NEGOTIATED AGREEMENT 

It is fully understood by the parties that the price of the Product and other mutual agreements of the parties set forth in this agreement were arrived at in consideration of this warranty, 

SPECIFICALLY INCLUDING THE WAIVER, RELEASE AND RENUNCIATION BY BUYER SET FORTH ABOVE (DISCLAIMER AND RELEASE). 

 

 

Содержание VR2Tx
































































Отзывы: