VEMCO - VR2Tx Manual
15 March
2019
22
3.7
Create Watch Table
A Watch Table is a list of tags of interest and is extremely helpful in identifying if a particular tag was in the
area surrounding a receiver. The tag information is entered in the Watch Table within VUE, where each tag
entered is assigned an Index number between 1 and 128. When completed, this list is sent to the receiver
through
Bluetooth
communication and accessed using the VR100 while the VR2Tx is deployed. How to
enter the tag information is explained in the steps below. The instructions for how to access the Watch Table
using the VR100 are found in the VR100 documentation.
Enter the Tag ID of the tag
you want added to the table.
Select the codespace from
the drop-down list. Tag ID
and codespace information
was shipped with the tag.
Click the “Add Tag” button.
STEP 2
Click the gear shaped
icon in the VUE ribbon
and select Watch
Table Configuration.
STEP 1
Continue to add tags until the Watch Table is complete
based on your needs. You may add between 1 and
128 tags.
After a tag has been entered in the Watch Table, it may
be selected by clicking the box to the right of the tag ID.
All tags can be selected at once using the “Select All
Tags” box. Once tags are selected, they can be
deleted from the list using the “Deleted Selected Tags”
button.
Step 4 explains the optional tasks of exporting and
importing the Watch Table. If you do not need Step 4,
then click “OK” to send the Watch Table to the VR2AR.
STEP 3
Continued…
VUE will not allow tag duplications in the Watch Table.
