8
INSTALLATION
MANUAL
INSTALLATION
1
CHECK THAT THE POWER SUPPLY IS DISCONNECTED
Make sure that the power supply is disconnected at the charger point of installation.
2
CHECK THE CONNECTIONS
Check that the electrical wiring required to power the charger is available at the point
of installation.
OPTIONAL: If you are also going to install a CURVE device, check that the wiring for
the device is also available. For more information, see ‘INSTALLATION OF THE CURVE
DEVICE’.
OPTIONAL: If you are going to connect the charger to a three-phase energy meter,
a communications device (modem, router, switch, ...) or to another charger, check
that the Ethernet wiring from that device is also available. For more information,
see “INSTALLATION OF THE THREE-PHASE METER SET” and/or “CONNECTION OF THE
CHARGER TO ANOTHER CHARGER, OR TO A COMMUNICATIONS ELEMENT”.
INSTALLATION
INSTALLATION OF THE LITE ZERO/UNO/KUBO CHARGER
3
OPTIONAL: INSTALLATION OF THE STAND ELEMENT
If the installation of a STAND element is necessary to anchor the charger to the
ground, see “INSTALLATION OF THE STAND ELEMENT”.
4
OPTIONAL: SIM CARD INSTALLATION
If it is necessary to install the SIM card, see “INSTALLATION OF THE SIM CARD”.
