8
SETTING THE CHANNEL
8
21
CHANGING THE BATTERIES
Setting the Channel on the
Transmitter: The transmitter and
receiver must be set to the same channel
for proper communication.
1
: Use the arrow button to select the channel
setting. Press the left and right
arrows until CH is displayed in the
upper right corner of the screen.
2: Press the center button on the arrow
button to change the setting.
3: Press the up and down arrows to adjust
the channel up or down.
4: Press the center button to lock the setting.
Setting the Channel on the Receiver:
1
: With the device on, press the CH– and
CH+ at the same time. The CH in the
display will blink, indicating that you can
now change the setting.
2: Press the CH– or CH+ buttons to
adjust the channel.
3: Press both CH– and CH+ buttons a
second time to save your setting. If no
action is taken in ten seconds, the device
will save the setting displayed.
Both the transmitter and receiver of the
Wireless ShutterBoss will display a blinking
battery icon when battery power is low.
The receiver uses a 3V CR2 lithium battery
which should last more than 400 hours of
standby time. It is easy to change. Slide open
the battery door on the end of the unit.
The transmitter uses a two AAA batteries,
which should last for four years under
standby. To replace the batteries, slide open
the battery cover on the back of the unit.
Make sure to install batteries in the correct
orientation of polarity.
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFS
FOR APPROVAL BEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
The channels you select for the transmitter
and receiver will become the default
settings for the next time you power up the
device.
When you select [––] as the channel for the
transmitter and receiver, this effectively
sets the devices to communicate on all
channels. A receiver set to [––] will
respond to any transmission it receives on
the 2.4GHz frequency. This is useful in
setups with multiple devices all needing to
respond to a single trigger.
Содержание shutterboss
Страница 1: ...1 USER MANUAL WIRELESS SHUTTERBOSS...
Страница 27: ...27...