19
WIRELESS SETUP
10
19
TIMER CONTROLS: NUMBER OF SHOTS
Once you’ve set the Interval time under the
Timer Controls, you must tell the Wireless
ShutterBoss how many shots to trigger.
1
. Turn on the receiver by pressing the
Power button until the display comes
on.
2. Set your camera exposure.
3: Use the arrow button on the transmitter
to select N under the Timer
Controls. Press the left and right
arrows until N is displayed.
4: Press the set button in the middle of
the arrow button to change the setting
for number of exposures. Use the up and
down arrows to change the number of
shots.
5: Press set button again to accept your
selection.
6: If this is the last of your Timer Control
settings, press Timer Start/Stop to
begin the exposure process.
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFS
FOR APPROVAL BEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
Mount the receiver onto your camera’s hot
shoe, facing forwards or backwards. If your
camera’s hot shoe is in use, you can mount
the receiver to an accessory bracket or a
tripod using either an accessory shoe or the
receiver’s
1
/4˝-20 threaded socket.
With your camera and receiver OFF,
connect the shutter release cable’s sub-mini
plug end to the receiver and the other end
to your camera’s shutter release jack.
Power up the receiver and then the camera.
Be sure to also read your camera’s owners’
manual for guidance on use of remotes.
N
TIMER CONTROLS
SHUTTER CONTROLS
CH
BATT
Содержание shutterboss
Страница 1: ...1 USER MANUAL WIRELESS SHUTTERBOSS...
Страница 27: ...27...