18
SHUTTER CONTROL: SINGLE SHOT
18
11
TIMER CONTROLS: INTERVALS
The Wireless ShutterBoss allows you to
control the amount of time between a
series of shots. Choose an interval that is
longer than your exposure time. If using a
flash, be sure to set an interval that is
longer than your flash recycle time.
1
. Turn on the receiver by pressing the
Power button until the display comes on.
2. Set your camera exposure.
3: Use the arrow button on the transmitter
to select INTVL under the Timer
Controls. Press the left and right
arrows until INTVL is displayed.
4: Press the set button in the middle of
the arrow button to change the exposure
Interval setting. Use the left and right
arrows to move between hours, minutes,
and seconds. Use the up and down
arrows to change the time values.
5: Press set button again to accept your
selection.
6: Continue on to other Timer Control
settings or press Timer Start/Stop to
begin the exposure process.
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFS
FOR APPROVAL BEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
1
. Turn on the receiver by pressing and
holding the Power button until the
display comes on.
2. Set your camera to single shot mode.
3: Use the arrow button on the transmitter
to select single shot mode. Press
the left and right arrows until the
single shot icon is displayed in the
bottom left of the screen.
TIMER CONTROLS
SHUTTER CONTROLS
CH
BATT
4. Press the transmitter’s shutter release
button halfway to wake or focus your
camera (if set to Auto Focus). The LEDs
on the transmitter and receiver will both
turn green.
5. Fully depress the shutter release
button on the transmitter. The LEDs
will turn red and the shutter will be
triggered.
In single shot mode, only the single shot
icon and the channel in use will display.
INTVL
TIMER CONTROLS
SHUTTER CONTROLS
CH
BATT
hours
minutes
seconds
Содержание shutterboss
Страница 1: ...1 USER MANUAL WIRELESS SHUTTERBOSS...
Страница 27: ...27...