TTL EV
Setting
20
Using a Transceiver in Master mode:
1. From the TTL Screen, press
Select
. The
screen will start flashing.
2. Press
A
,
B
, or
C
to select the desired
flash group. The selected group will
start flashing.
3. Use the
+
and
−
buttons to set the EV
(exposure) in TTL mode.
4. Press
Select
twice when done to apply
the settings.
5. Press /
Test
to confirm settings.
ADJUSTING A FLASH GROUP’S TTL POWER (EV)
Note:
/
Test
fires a test flash on all
connected hot-shoe lights and studio lights.
It is advisable to always test fire your flashes
after making changes to confirm your settings.