12
1. With your Receiver and flash Off, mount
the Receiver to your 1/4˝-20 light stand
or accessory stand. Take care not to
overtighten the Receiver.
2. Slide the Group Switch to A, B, or C to
select the desired Group. (The Group
D setting on the Receiver is for factory
calibration only and is not available
for use.)
3. Slide the Channel Switch to 1, 2,
3, or Auto.
(
“Auto” is equal to the
Transceiver's Channel “4”.)
MOUNTING THE RECEIVER
Note: make sure that all your FreeWave Aviator units are set to the same channel before use.