Channel
16
Setting an Aviator
Transceiver’s Channel
To set the desired Channel,
do the following:
1. From the TTL Screen or the Slave Mode
screen, press
Menu
to enter Channel
Select.
2. Use the
+
and
−
buttons to select the
desired channel from 1-16 (channels
5-16 are only available when using two
Aviator Transceiver units).
3. Press
Select
to apply the setting.
Setting an Aviator Receiver’s Channel
While the Receiver is Off, slide the Channel
switch to the desired Channel (1, 2, 3
or Auto). Then turn the Receiver on.
Note: “Auto” is equal to the
Transceiver's Channel “4”
Note: all devices must be set to the same channel for the system to function properly.
SETTING CHANNELS