22
HPS10 PersonalScope
TM
Display
ADJUSTING THE CONTRAST
Short press
: Maximum contrast.
Long press
: Change the contrast.
Keep pressing the
‘Contrast’
-key to change the
contrast. Release the button at the desired
setting.
DISPLAY SET-UP
Short press
: Use the left/right cursorkeys to select one
of the 5 screen layouts.
(see fig.10 to 14)
Use the up/down cursorkeys to view/hide the markers,
grid or crosshair on the screen.
•
A
grid
divides the screen into reference
points.
(Fig. 12)
•
A
cross
inserts a coordinate system into the
screen.
(Fig. 13)
•
Markers
: Moveable markers in order to
measure the signal
(Fig. 14).
Notes:
·
The number of readout-digits depends on the
selected display layout.
· At dynamic display mode (see display setup),
the display layout changes for best fitting by
shifting the markers or x-position.
· When no markers are displauyed, the cursor
keys are set for changing the time base or input
sensitivity when no keys are pressed during 10
seconds.
· Markers can also be accessed directly by
pressing the
‘Marker 1-2’
key.
Fig 10
Fig 11
Fig 12
Fig 13
Fig 14
Display
Setup
HPS10_man.pub
page 22
Wednesday, April 03, 2002 09:22
Composite
