PEM7D
Rev. 01
04.06.2010 ©Velleman
nv
5
environmental conditions. Mount the reflector in that
location.
•
When applicable, connect the counter
[6]
(optional, not incl.)
to the output
[5]
using the 10m cable that comes with the
counter (
PEM7D/C
).
5.
Troubleshooting
When problems are encountered, refer to following overview
before contacting your local dealer:
•
Check that the speaker is set to “CHIME” or “ALARM”. “OFF”
= silent.
•
Check that the timer and/or volume are not in the “min.”
position.
•
A red LED indicates proper alignment of the sensor and
reflector. If the LED is not lit, realign sensor and reflector.
Distance must be at least 50cm.
•
Make sure the adapter is firmly connected to the speaker.
•
Make sure the sensor is firmly connected to the input of the
speaker.
6.
Technical specifications
GENERAL
Nominal Detection Range
7m
Supply Voltage
DC 9-15V
Light Source
IR LED
Output NPN
open
collector
Ambient Temperature
-20 to +50°C
SYSTEM
Power Supply
AC to DC adapter 12V (included)
Total Current Consumption < 130mA
Standby Current
25mA
SPEAKER
Supply Voltage
DC 9-15V
Speaker Output
Chime / Off / Alarm selectable through
switch
Speaker Time
± 1 second for chime, 30sec. for alarm
Adjustable Timer 3-30sec.
for
alarm
Adjustable Volume
yes (from 0 to max.)
External Output
NPN output (for external device e.g.
counter)
Use this device with original accessories only. Velleman
nv cannot be held responsible in the event of damage or
injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest
version of this user manual, please visit our website
