![background image](http://html1.mh-extra.com/html/velleman/hq-power-leda03/hq-power-leda03_user-manual_861759005.webp)
LEDA03
Rev. 01
18.05.2010
©Velleman
nv
5
•
The
LEDA03
receives power and signal from the controller (
LEDA03C
,
not incl.). Refer to the illustration on page
2
of this manual.
•
Always connect the LED-lamp to the
OUT-1
port of the splitter and the
linking cable from
OUT-2
of one splitter to
IN
of the next. Only the last
splitter in the chain must have a LED-lamp connected to
OUT-2
.
•
Connect the
IN-
port of the first splitter in the chain to the
OUTPUT
port
of the controller (
LEDA03C
, not incl.).
Notes:
•
When a single
LEDA03
is used, connect it straight to the
OUTPUT
port
of the controller.
•
The linking cables are straight cables.
•
Connect max. 12
LEDA03
s to a controller.
6.
Technical specifications
power supply
48VDC / 350mA (via optional controller LEDA03C)
power/data input
RJ45
power consumption 3W
light source
3 x 1W
beam angle
45°
dimensions
Ø50 x 71mm
weight 0.2kg
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulted from
(incorrect) use of this device. For more info concerning this product,
please visit our website www.hqpower.eu. The information in this
manual is subject to change without prior notice.
©
COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned
by Velleman nv.
All worldwide rights reserved. No part of this manual may
be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.