CAMSETW3
- 4 -
NL
You're getting a weak signal or there is interference :
•
Reorient the antenna of the monitor.
•
Set the same channel for the camera and monitor (same channel for both, of course).
•
Make sure there is no microwave between or in close proximity to the camera and the monitor. If so, deactivate it
or move it.
•
Do not exceed the max. distance of ± 100m between the camera and the monitor.
Maintenance
•
Only reorient the antennas if the picture quality is unsatisfactory.
•
Keep this device away from children and unauthorised users.
•
Fingerprints or smudges on the lens can affect picture quality. Do not touch the lens with your fingers.
•
Only use the monitor indoors and do not place it in dusty, moist, hot or very cold environments.
•
Do not try to open the housing to avoid damage to the device.
•
Only use the included power supply or one with identical technical specifications.
•
Do not overload the used outlets and extension cords to avoid all risks of electroshocks and fire.
•
The signals of your system may also be received by other devices using the same 2.4GHz frequency. Even
conversations in rooms close to the camera may be broadcast. Deactivate the camera when you don't need it in
order to guarantee your privacy.
Specifications
CAMERA
MONITOR
Frequency
2.4GHz
A/V mod/demod. Method
FM
Channels
4 selectable channels
Antenna
built-in omnidirectional antenna
directional antenna
Dimensions (B x H x D)
10.5 x 13 x 11.5cm
15 x 19 x 17cm
Weight
300g
1400g
Power supply
9Vdc, 500mA
13.5Vdc, 1000mA / 10 type C batteries
Operating temperature
-10 ~ 40°C (14 ~ 104°F)
0 ~ 40°C (32 ~ 104°F)
¼" CMOS image sensor
5.5" B/W monitor
Effective pixels
EIA: 320 (H) x 240 (V)
CCIR: 352 (H) x 288 (V)
Resolution
V: 350 lines
H: 300 lines
Lens: f 3.6mm, F 2.0
Max. sound output: 800mW
The specifications can be subject to change without prior notice.
