CAMIP5
Rev.01
27.10.2010
©
Velleman nv
17
Restore Factory Settings
•
Selecting ‘OK’ will clear the memory and reset the device to factory settings. All settings, e.g.
user settings, mail and FTP settings, alarm schedule… are lost.
Reboot Device
•
Select ‘OK’ to reboot the camera.
Note:
this will reset the system time. Refer to
Date&Time settings
.
Log
•
The log shows an overview of everyone who accessed the IP camera. It is cleared when rebooting
the system.
Back
•
Use this option to return to the
For Visitor
or
For Operator
page layout.
9.
Additional user information
9.1 Password
•
Default, the administrator login is
admin
without a password. To enhance security, a new
administrator password should be set as soon as possible (see
§8.2
under
For Administrator
layout – Users Settings).
•
If the login or password of the administrator(s) are forgotten or corrupt, the system can be reset
to factory defaults (
admin
, no password) by pressing and holding the
RESET
button at the
bottom of the camera for about 5 seconds.