Veldink4kids Kiddo Adapt, Руководство пользователя

Страница: 30 / 37

30
9.1 Adjusting the knee and ankle angle
Knee angle and ankle angle
For setting the knee angle and the ankle angle loosen the screw(1) from figure 28. As a result the foot
and leg support can be brought to motion. Adjust the position from the foot and leg support and
tighten the screw(1).
Figure 15: Adjust of the angle of the foot support (Image Kiddo Tilt)
The height of the foot support can be adjusted by following the steps that are sown on the next page.
(figure 19).
•
Step 1: Set the footplate in the upward position
•
Step 2: By carrying out step 1 the screws(2) will come free. Loosen the screw a few turns.
•
Step 3: Because it is turned loose the inner tube is loose from the outer tube. Position the foot
support on the desired height and tightened the screws(2) again.