8
/
24
2.2 Mechanical Part
To make this Inverter satisfy the standards and technical specifications, this Inverter
must be installed in strict accordance with the following requirements:
1.
This Inverter shall be installed vertically to ensure the cooling fin at the back of
this Inverter can transfer heat in maximum. The gap which is no shorter than
15cm shall be left on the top and at the bottom of this Inverter.
2.
Sufficient space shall be left surrounding this Inverter so as to facilitate
maintenance.
3.
Please use this Inverter by satisfying the following environmental conditions:
surrounding ambient temperature: -10
℃
~+50
℃
(unfrozen), surrounding
ambient humidity: below 93%RH (non-condensation); storage temperature
-20
℃
~+70
℃
(applicable temperature within short period).
4.
The indoor service environment shall be free from corrosive gas, combustible
