4
/
24
Ordering Instruction
1.
This inverter is applicable to single phase 200V~240V, 50Hz/60Hz AC motor
water pump. The load is only applicable to motor.
2.
Please determine the specific power and model of the water pump according
to the hydraulic head and water yield and by consulting the water pump manufacturer
or referring to the relevant data before purchasing this Inverter.
3.
The power as stated in the nameplate of water pump is generally the output
power, instead of the actual input power or motor power, either of which is generally
greater than the nominal power due to the efficiency. The power of this Inverter shall
be larger properly (this Inverter can be configured according to the motor input power
if the power has been noted); otherwise, it easily causes overload.
4.
Determination of solar photovoltaic battery array power: configured according
to the requirements for water withdrawal on site; the model and power of the water
pump shall be determined according to the hydraulic head, flow, average sunlight and
wind speed. The total power of photovoltaic array is configured according to 1.5-2
times.
5.
This Inverter was provided with two working modes before delivery according
to t
he client’s actual situations--- automatic mode and manual mode. This Inverter will
start and adjust the output power automatically under automatic mode according to
the input power of solar battery array, that is to realize the traceability of the maximum
power point. It will operate automatically to adjust the output power of this Inverter
according to the sunlight intensity; this Inverter will not drive the water pump until it is
started manually under manual mode.
6.
The electric reactor shall be added to remove harmonic wave if this Inverter is
very far away from the water pump.
7.
