Veigel S47290920, Инструкция по установке и эксплуатации

Страница: 14 / 24

5-1
Assembly
Assembly
Safety information
Tightening torques
The tightening torques as specified by the vehicle manufacturer apply when
converting vehicles using Veigel driving aids.
Unless otherwise stated in the text, the usual DIN tightening torques provided
in the table below apply for Veigel parts.
ATTEN-
TION!
ATTEN-
TION!
• Installation and maintenance work may only be performed by specialist staff
using suitable tools.
• Please read these operating instructions carefully before installing the Twister.
• Pass the operating instructions on to the customer, together with the installa -
tion instructions for the Twister and any parts certificate, when you hand over
the vehicle.
• Observe the applicable accident prevention and safety provisions when
installing and maintaining the Twister.
• Only accessories obtained from us may be used with the Twister.
• Structural modifications to the Twister may only be performed following
consultation with the manufacturer.
• If the Twister is installed in an authorised workshop, the installation record must
be filled in (see appendix). If it is installed at the factory, a separate installation
record will be prepared and archived at the factory.