Veigel S47290920, Инструкция по установке и эксплуатации

Страница: 18 / 24

5-5
Assembly
Figure 5.5: Seat belt buckle cable
Figure 5.6: Assembling the belt connection
Assemble the seat belt buckle to
the belt connection:
Use the original screw to attach
the removed seat belt buckle to
the holder as shown in the image.
Use the cable ties to attach the
cable to the two designated holes.
Belt connection
Slide the belt connection together
with the assembled seat belt
buckle from the back on the left
underneath the upper plate of the
Twister until the hole template is
flush.
Insert both M8x25 fillister-head
screws from above through the
seat rails and secure from below
with the M8 nuts.
M8 = 25 Nm ±10%
2x
Figure 5.7: Seat belt buckle assembled