Vega VEGAMIP 61, Руководство по эксплуатации

Страница: 29 / 48

L evel S witching status S ignal lamp -
S witching output
( yellow )
M
ode min
.
D ry run protection
open
F ailure of the supply
voltage
( max ./ min . mode )
any open
M alfunction any open
R ed failure LED
lights
D epending on the switching function your output should carry out , you
can determine the switching direction by means of the slide switch .
l
F or maximum indication or over fi ll protection set the slide switch to
position max .
l
F
or minimum indication or dry run protection
,
set the slide switch to
position min
.
T he transistor output is closed when the yellow signal lamp lights .
W ith the two keys you can change the LED indication strip and adjust
the switching point to the medium .
T he keys are lowered to avoid unintentional changes of the setting . F or
adjustment , use for example , a small screwdriver .
I f you press one of the keys for more than two seconds , the adjustment
range shifts automatically in the respective direction . T he greater the
distance between emitting and receiving unit , the greater the adjust -
ment range of the indication . T he LED indication strip always shows a
small section of the actual measuring range .
P ressing the
"<
--
"
key makes the sensor more sensitive . P ressing the
"
--
>" key makes the sensor less sensitive
.
S ensitivity adjustment
VEGAMIP R
61
• - T ransistor
29
6
S etup
40694
-
EN
-
120228